The Super Skamper-Ramp is a blowmolded, white polyethylene assembly, recyclable, chemical- and UV-resistant, with nylon rope, washers, and non-rusting D-ring-clips for attaching.It snaps together but needs to be mounted to the pool deck, walled pond/canal/bulkhead, or floating dock. While it was designed for emergency escape it will withstand more frequent use, even the weights of very large pets and animals. Strong enough for animals up to 200lbs. Super Skamper-Ramp - SKR3 - is a blowmolded polyethylene assembly Weight Super Skamper-Ramp - SKR3 - 5 lbs 10oz (~ 2.6 kg) boxed, and ~5 lb (2.1 kg) when assembled. Sizes Super Skamper-Ramp, assembled - 42" x 13" x 6.5" (106 cm x 33 cm x 16 cm) Applications Super Skamper-Ramp is versatile enough for infrequent or frequent use by most any size animal in pools (commercial or private), walled ponds, reservoirs, most docks, many boats. It was designed for emergency escape--that is still its purpose--but it was also designed to hold larger animals and better protetct vinyl pools. It can be used with, or without, snapping in the extension. Boat installation often requires some ingenuity, and awareness that chop may ?kick it up?. Outboard motors, are the easiest ? as in the picture here, simply brace the ramp on the stern alongside a motor and tie both ropes to one stern cleat. As with pool installation, the ramp must have at least 3'' submerged beneath the water. We will honestly tell you that if your boat gunwale is too high out of the water (like many sailboats), has a sloped transom/stern or no place to ?create? a brace, it may not be appropriate for your boat. Skamper-Ramp works well with floating docks and houseboats, too! It just must have the 5-6'' of vertical surface to brace against and have at least 3" of ramp in the water at all times. Even in winter, leaving it hanging down insde a pool that is partially drained down, under a winter cover, or on top of a non-permeable cover, can prevent accidental animal drowning by giving them an escape route. Attachment - Skamper Ramp manufacturer suggests attaching the ramp to the pool?s deck by bolting (if wood) or sinking an anchor (stone, poured, etc) to hold the stainless steel D-ring-clips and rope provided. The ramps have a knot tied as close to the ramp surface as possible in order to maintain its orientation and not slip along the rope. The only additional part you will need and must purchase separately is the 1/4" stainless stell pan-head screw about 1.25" long (and concrete anchor) required for your pool deck surface. Some people choose to use existing railings, pool cover anchors, or water leveler covers, rather than drilling into their deck. In this case, be sure the rope tie-downs are not spread much farther apart than the width of the ramp for optimal performance. The ramp should float/hang in the water at an angle that is approximately 30-degrees below horizontal so that the ramp?s round ?nose? is submerged by a few inches. There are two sets of holes in the ramp for threading the rope through, in order to have a snug fit to the wall (including under a deep coping, such as with a steel sided vinyl wall.) In the case of thick coping/a deep overhanging deck, be sure to rethread the rope through the holes below the logo, in order to pull the ramp snugly under the overhang, and close to the pool wall. Lead-plug or stainless steel anchors with non-rusting screws are suggested for poured/solid decks; non-rusting bolts and nuts with a lock washer are suggested for hollow decks. Customers should check with their pool service company if they are unsure what method to use! Vinyl Liner Pools All Skamper-Ramp models are designed to keep an animal?s claws from slashing the plastic walls of vinyl liner pools as they attempt escape, however the Super Skamper-Ramp is probably the best solution because of its smooth construction . Each corner radius is designed to protect--not puncture--the vinyl liner. In order to minimize rub, if you have it or can get it, we suggest doubling the vinyl wall layer in the area where the ramp will be installed. NOTE: For optimal performance of the Skamper-Ramp models it is important, from time to time, to check and make sure the rope is as taut as can be so the ramp is very snug to the (pool) wall. Manufacturer Warranty: SKU: Hsmp-776 If you are outside the Continental United States, use the shipping calculator below. If your country does not calculate, we do not usually ship this item to your country. You can email us to request an exception.

Don't Loose your Pet to Drowning - Get a Scamper Ramp ( For animals up to 45 lbs. This simple white, box-corrugated, hi-tech plastic ramp attaches to the deck of the pool, walled pond, or even most docks and some boats. Because all living beings see 550nm (white), animals can see it?day or night?and they "skamper" out on the ramp by themselves! Provides animals with a way out of their water entrapment on their own Made of strong, lightweight, box-corrugated, ribbed polypropylene plastic Skamper-Ramp® provides all animals--dogs, cats, ferrets, as well as "critters"--with way to get out of their water entrapment even when no people are around If desired, simply "flip it out" when the pool is in use, and flip it in to safeguard your pet when you leave the pool area Deck and assembly hardware included Made in N. America with pride! No more morning surprises Durable, strong, affordable, lightweight Easy to assemble and install 2 year warranty against product manufacturer defect Safe for vinyl lined pools Materials hi-tech, white, box-extruded, recyclable, chemical- and UV-resistant, polypropylene ramp with nylon wing strips, nylon rope, nylon fasteners, and non-rusting D-ring-clips for attaching. SKR1 is made from 8MM box-extruded polypropylene for the ramp SKR2 is now made from 10MM box-extruded polypropylene for both the ramp and extender (check store for this size) Size Skamper-Ramp, assembled - 25? x 13? x 5? Skamper-Ramp Big Dog, assembled - 39" x 13" x 5" Attachment We suggest attaching the ramp to the pool?s deck by bolting (if wood) or sinking an anchor (stone, poured, etc) to hold the stainless steel D-ring-clips and rope provided. The ramps have a knot tied as close to the ramp surface as possible in order for it to maintain its orientation and not slip along the rope.Some people choose to use existing railings, pool cover anchors, or water leveler covers, rather than drilling into their deck. In this case, be sure the rope tie-downs are not spread much farther apart than the width of the ramp for optimal performance. The ramp should float/hang in the water at an angle that is approximately 30-degrees below horizontal so that the ramp?s round ?nose? is submerged by a few inches. There are two sets of holes in the ramp for threading the rope through, in order to have a snug fit to the wall (including under a deep coping, such as with a steel sided vinyl wall.) In the case of thick coping/a deep overhanging deck, be sure to rethread the rope through the holes below the logo, in order to pull the ramp snugly under the overhang, and close to the pool wall.Lead-plug or stainless steel anchors with non-rusting screws are suggested for poured/solid decks; non-rusting bolts and nuts with a lock washer are suggested for hollow decks. Customers should check with their pool service company if they are unsure what method to use! For extra buoyancy we suggest using flotation ?noodle? sections attached with plastic tie-downs. Vinyl Liner Pools Skamper-Ramps are designed to keep an animal?s claws from slashing the plastic walls of vinyl liner pools as they attempt escape. Each corner radius is designed to protect--not puncture--the vinyl liner. While we haven't had anyone report a problem but we understand and respect the fear of replacing a liner. In order to minimize rub, if you have it or can get it, we suggest doubling the vinyl wall layer in the area where the ramp will be installed. If that is not possible you could tape the edge of the ramp that will be closest to the pool wall with duct tape or waterproof vinyl pool /repair tape. Questions? Q. Why does it work? A. Skamper-Ramp is an escape ramp: a means of preventing animals and pets from drowning. It is a "keep it simple stupid" solution to very major problem. Easy to assemble, light weight, strong and inexpensive. It is a very simple-looking product, but behind that simplicity there is a lot of science and testing. The primary science is that ALL living beings - domestic or wild; bugs, animals, or humans; colorblind or not - see at the wavelength that is the color white. Skamper Ramp is the only water rescue device on the market that provides animals with an escape from drowning?allowing them to exit the water on their own!! Skamper-Ramp must be installed so that a few inches of the "nose" (curved) end are under water and the ramp breaks the water's surface, enabling the animal to see it at eye level. The "open-box-top" end (closest to the pool wall) must be very snug against a vertical wall -- whether it's a pool, floating or fixed dock, walled pond, spa, stern of a boat, or water troughs in pastures and remote ranchland -- in order to provide the rigidity necessary for an animal to "skamper" out on the ramp. You'll notice the ramp doesn't have a decorative pattern ? animals don?t see colors. Q. What size do I need? A. We suggest that the original Skamper-Ramp, SKR1, be used for animals up to 45 lbs - however we have had large dogs like a 120 lb Rhodesian Ridgeback and a 95 lb golden Retriever go out on the small ramp; all that happens is it becomes more vertical, and may even crease near the rope corners, but it will still work. You can bend it but you can't actually break the rugged polypropylene plastic or its flexible plastic wing strips. Ideally though, the SKR1 ramp was designed for smaller critters that can?t possibly pull themselves out. For 2007 we have strengthened the SKR2, our version for larger dogs, most docks and many boats. The Skamper-Ramp Big Dog? version (SKR2) helps when there is a greater distance to the water or the animal is larger, although the ramp is light and supports weight because the water is under it. The increased length of the Big Dog version allows larger animals, more shoulder to hip length, and is much more robust than the original Skamper-Ramp. Of course boat sterns have more variety than pools, so they often require a bit more ingenuity to install but, where there is a will there is a way! Those who wish more buoyancy to use with a larger or infirmed animals or using with a boat can try securing flotation ?noodles? on the underside of the ramp, away from the ?nose? end while still being sure that the end is submerged by a few inches. But remember it is the box end that is sturdiest and most rigid and that needs to be very snug to the wall. Sometimes rethreading the ropes into the two holes under our logo, increases rigidity. For people with very small animals (pets weighing <25lbs), the larger ramp can be used as an indoor ramp up to furniture, and it can be tucked out of sight when not in use.People on farms and ranches can use the original (SKR1) ramp by anchoring it in livestock/horse water troughs so that any animals that might fall in can escape. The creatures won't drown and pollute the water as they decay. One less chore for the busy farmer/rancher, and, again, peace-of -mind that there is good water for animals to drink. Also, if people don't cover their pools for winter, but do drain them, hanging the Skamper-Ramp Big Dog down into the pool makes an easy escape ramp for any animal that may get caught during the off-season. Q. What about vinyl-lined pools and above ground pools? A. Either ramp works well for permanent vinyl liner pools - in-ground or above-ground - by making sure that an animal?s claws don't puncture the pool liner. Make sure that if you have a deck surface that overhangs the pool wall by 1" or more you re-lace the ramp?s rope to the set of holes below the Skamper-Ramp logo so that the ramp can be snugged under the overhang, directly against the side wall. In normal usage, it will not cut through or tear the vinyl. For peace-of-mind, a double layer of vinyl can be put on the side wall of the pool where the ramp will hang if you can get some from your vinyl pool contractor, or tape the edges of the ramp with vinyl repair tape, but neither should be necessary.We do NOT recommend it for soft-sided, non-permanent, above-ground pools. However, you could try to adapt your deck (primarily by affixing a 1x10 board under the deck with a brace behind it holding it perpendicular to the deck and parallel to the pool wall) so that the Skamper-Ramp will have a rigid flat surface to brace against so that animals may escape using it. Q. What is it made of? A. Skamper-Ramp® original versions for animals up to 45 lbs are made from 8mm, chemical- and UV-resistant, rugged, recyclable, box-extruded, polypropylene with nylon and stainless steel hardware. The new Skamper-Ramp Big Dog? version is for animals over 45 lbs, most docks and many boats. It is now made entirely from 10mm, chemical- and UV-resistant, rugged, recyclable, box-extruded, polypropylene with nylon and stainless steel hardware and longer sidewalls. For this reason they will not yellow or become ?scummy? over time. The ramps come complete with nylon rope, nuts, bolts, washers, and wing strips - as well the two stainless steel d-ring clips for anchoring. After 6 years of research and in-pool testing we have found that the box-extruded plastic has the longest life-span, is most economical, is lightest weight while providing the greatest strength-to-weight ratio along with robustness, is most reliable, is most versatile to use, and is easiest to assemble. The size was determined by the fact that the actual shoulder width of most all dogs, and therefore the placement of their feet, virtually never exceeds 12?. Most any animal?s upper body can be held out of water by the original size, allowing the ramp to do what it is supposed to do ? prevent drowning. Because so many customers asked for it, we made the long version (Skamper-Ramp Big Dog?) for dogs that weigh more -- to distribute their weight over more distance and because of their longer shoulder to hip lengths. But the original size is still the most commonly used for escape. We suggest that the original Skamper-Ramp be used for animals up to 45 lbs. However we have had very large dogs go out on the small ramp; all that happens is it becomes more vertical, and may even crease, but it will still work. You can bend but you can't actually break the polypropylene ramp or its flexible plastic wing strips. The new Skamper-Ramp Big Dog is now made completely of 10MM box-extruded polypropylene and is best used for larger animals, over 45 lbs, and for floating docks or houseboats, many boats. Boats have such a variety of design that using the ramp often requires a bit more installation ingenuity - but as many customers have told us, 'with boats, where there's a will there's a way!' For those with deep coping on their pool the rope should be rethreaded through the two holes underneath the Skamper-Ramp logo before securing. For people with very small pets, like toy and teacup breeds, the larger ramp can be used as an indoor ramp for pets weighing less than 25 lbs, to get up onto, or down from furniture and then tuck out of sight when not in use. For those who live on farms and ranches, you can anchor the regular Skamper-Ramp in livestock/equine water troughs so that any critters that might fall in, when going for a drink or swim, have a means of escape and won't drown and pollute the water as they decay. One less chore for the busy farmer/rancher, and peace of mind that there is good water for animals to drink. Also, if pools are left uncovered for winter, but slightly drained, hanging the Skamper-Ramp Big Dog down into the pool makes an easy escape ramp for any animal that may get caught during the off-season. Q. Why do I need a Skamper-Ramp if I have a pool alarm, a fenced pool, or I have trained my dog to the steps? A. Fence gates do get left open from time to time and don?t always get securely closed. Many animals--especially "critters!" manage to get over or under fencing. Alarms are great if someone is around to hear them.In training a pet to the steps (which are underwater and can?t be seen by the pet), you have actually trained your pet to some marker. But do you know exactly what that marker is that your pet is using? What if that potted plant is moved for a party, or the landscape changes ? how will your pet find the steps then? And while you may have trained your dog to the steps, that is when you go to the pool with them or call them out from a consistent place, not necessarily when you are not there. What if they are spooked, chased or fall in, or if some other animal gets to your pool? Then the situation is not the same. Just as one plans for layers of safety protection to keep people from drowning in the pool, one needs to also plan for layers of protection to keep animals from drowning in pools. There is great value to the peace of mind that comes from knowing there is one additional, inexpensive layer for drowning prevention in addition to your fence and/or your training. Q. Are there alternative anchoring methods? A. For those that don?t want to drill holes into their decks, it is possible to use existing tie down points such as pool cover attachment anchors, clips, railings, etc. There are many creative ways to attach the ramp, just be sure that the ropes are not spread too far apart--they should be parallel or come together at one point--that the back and wings have a straight/vertical surface to brace snuggly against, and that the force is downward (diagonal vectors) so it does not pull purely horizontally (or it will pull out.) There is no one right way to install a Skamper-Ramp - two criteria are critical: 1) a few inches of the round "nose" end need to be submerged so that the white ramp breaks the water surface so the animal will see the ramp leading out while swimming, even in stress; and 2) the box end of the ramp needs to be as snug as possible against a "rigid" flat, vertical wall so that when a critter or pet gets on the "nose" end the Skamper-Ramp has something to brace against. It is the open-box-end and stabilizing wing-strips that provide rigidity and robustness, especially when braced against a vertical element, that makes it work. The most important point about the installation is to have the Skamper-Ramp as snug to the pool wall as possible, while still having a few inches of the ?nose? end of the ramp submerged. To accomplish that there is a separate set of holes for (re)threading the connection rope (below the Skamper-Ramp logo) if need be. NOTE: If it seems that the ramp wobbles too much and it is as tight as you can get it, the ramp will work better if the rope is rethreaded through the two rope holes below the Skamper logo to improve a snug wall fit while helping to prevent tipping and provide stability as the animal climbs out. Q. How long will it last? A. As stated above, the ramp is made of box-extruded polypropylene (a type of plastic)--one of the strongest, most durable materials available that floats. In addition, the polypropylene used is UV- and chemical- resistant. Because of this, we know it will hold up for a very long time--one has been installed in a pool in Charleston, SC for over 5 years, still looks great and is going strong. While we can't make guarantees, it should last a very long time! Q. Are there other uses besides commercial or residential pools? A. Our customers are creative in their applications. Many people are buying Skamper-Ramps for their floating docks, fixed docks, and boats (from the stern transom or with the swim platforms); to use for thin ice rescue; for indoor ramps for very small or light weight animals; and in water troughs in pastures and remote ranchland. Hotels, motels, municipal water system reservoirs can all take advantage of Skamper-Ramp's drowning prevention. Let us know yours! This is for the (SKR1) For animals up to 45 lbs. Other ramp sold seperate. Manufacturer Warranty: 1 year SKU: skr1 If you are outside the Continental United States, use the shipping calculator below. If your country does not calculate, we do not usually ship this item to your country. You can email us to request an exception.

New and Improved Tropic Shower! Give Your Pet A WARM BATH! Designed to work with your washing machine valves and garden hose, Tropic Shower permanetly installs in three easy steps. Simply attach your harden hose and you're ready to go! Tropic Shower Quality Features One - time temperature setting Heat & pressure rated Solid brass components Fan nozzle with on/off switch and volume control Also great for swimming pool rinse off. Ships free when ordered at same time as Booster Bath. Manufacturer Warranty: 2 years limited SKU: TS If you are outside the Continental United States, use the shipping calculator below. If your country does not calculate, we do not usually ship this item to your country. You can email us to request an exception.

Aquabot Turbo Solo RC remote control pool vacuum The Aquabot Turbo Solo is the #1 robotic pool cleaner with wireless remote guidance that automatically scrubs, vacuums, microfilters and maneuvers to completely clean pools of any configuration or surface type in 3 hours or less! Just take the Solo out of the box, and put it in your pool, No installation required! Technical Specifications - Aquabot Turbo Solo Remote Control Quantity of Water Filtered 4200 Gallons per Hour Cleaning Coverage 6500 Sq. Ft / Hr. Electrical Cord Length 60 ft. Unit Weight 19 lbs. Wattage 155 Watts Reset Switch Manual (To prevent accidental restart) Operating Cost 1 Kilowatt hr. per 7 hours Approximately 15cents per use Electrical Plug 110v/60Hz or 220v/50Hz Filtration - Micron Rating Self Contained ? Down To 2 Microns Scrubbing Ability Heavy Duty - All Types Shipping Dimensions 17.5" x 21.5" x 19.5" Shipping Weight 40 lbs. This item has to be shipped to a confirmed paypal address. We are an authorized dealer for Aqua Products, so you can rest assured that you will be receiving authentic, brand new products with a warranty that will be honored by the manufacturer. Manufacturer Warranty: 1 year SKU: aquaturbosoloRC If you are outside the Continental United States, use the shipping calculator below. If your country does not calculate, we do not usually ship this item to your country. You can email us to request an exception.

The Aquabot Pool Rover is Aqua Product's standard above ground automatic pool cleaner for residential pools. Operating independently without the use of the mail pool filter, the Aquabot Pool Rover works without hoses, hook-ups, booster pumps or suction lines. Just place it in the water, plug it in, and push a button. The pool gets cleaned... AUTOMATICALLY! Utilizing a highly-efficient, reusable filter bag, Aqua Products cleaner is capable of filtering unwanted debris as small as 2 microns in size, yet still allow up to 4200 gallons of water to flow through per hour. The end result? Small debris such as sand, silt, hair, metal particles, bacteria, and most algae, as well as large debris such as acorns, twigs, and leaves, are all quickly and permanently removed, leaving you with a cleaner, healthierm, and more beautiful pool. We are an authorized dealer. Make sure to purchase from an authorized dealer to get new, unused products and full warranty. Warranty information available at the manufacturer website, www.aquaproducts.com Technical Specifications - Pool Rover Quantity of Water Filtered 4200 Gallons per Hour Cleaning Coverage 5400 Sq. Ft / Hr. Electrical Cord Length 40 ft. Unit Weight 11 lbs. Wattage 140 Watts Reset Switch Manual (To prevent accidental restart) Operating Cost Less than 5 cents per cycle Electrical Plug 110v/60Hz Filtration - Micron Rating Self Contained ? Down To 2 Microns Manufacturer Warranty: 1 year SKU: aquarover If you are outside the Continental United States, use the shipping calculator below. If your country does not calculate, we do not usually ship this item to your country. You can email us to request an exception.

Aquabot Turbo RC remote control inground pool vacuum The Aquabot Turbo Remote Control has all the features and performance to make pool cleaning a breeze! Full turbo performance and features with dual directional controllers that allow quick and spot clean-ups. Ideal for "L" shaped pools that require precise directing of the cleaner. Technical Specifications - Aquabot Turbo Remote Control Quantity of Water Filtered 4200 Gallons per Hour Cleaning Coverage 6500 Sq. Ft / Hr. Electrical Cord Length 75 ft. Unit Weight 19 lbs. Wattage 155 Watts Reset Switch Manual (To prevent accidental restart) Operating Cost 1 Kilowatt hr. per 7 hours Approximately 15cents per use Electrical Plug 110v/60Hz or 220v/50Hz Filtration - Micron Rating Self Contained ? Down To 2 Microns Scrubbing Ability Heavy Duty - All Types Shipping Dimensions 17.5" x 21.5" x 19.5" Shipping Weight 40 lbs. This item has to be shipped to a confirmed paypal address. We are an authorized dealer for Aqua Products, so you can rest assured that you will be receiving authentic, brand new products with a warranty that will be honored by the manufacturer. Manufacturer Warranty: 1 year SKU: aquaturboRC If you are outside the Continental United States, use the shipping calculator below. If your country does not calculate, we do not usually ship this item to your country. You can email us to request an exception.

Aquabot Turbo inground swimming pool vacuum The world's #1 selling robotic pool cleaner with performance enhancements that keep it far ahead of the competition! The Aquabot Turbo comes with an adjustable 7 hour shut-off timer, a safety reset switch and "G" tooth protective climbing tracks. The Aquabot Turbo is recommended for pools up to 25' x 50' Technical Specifications - Aquabot Turbo Quantity of Water Filtered 4200 Gallons per Hour Cleaning Coverage 6500 Sq. Ft / Hr. Electrical Cord Length 60 ft. Unit Weight 18 lbs. Wattage 155 Watts Reset Switch Manual (To prevent accidental restart) Operating Cost 1 Kilowatt hr. per 7 hours Approximately 15cents per use Electrical Plug 110v/60Hz or 220v/50Hz Filtration - Micron Rating Self Contained ? Down To 2 Microns Scrubbing Ability Heavy Duty - All Types Shipping Dimensions 17.5" x 17.5" x 19.5" Shipping Weight 38 lbs. This item has to be shipped to a confirmed paypal address. We are an authorized dealer. Manufacturer Warranty: 1 year SKU: aquaturbo If you are outside the Continental United States, use the shipping calculator below. If your country does not calculate, we do not usually ship this item to your country. You can email us to request an exception.

Aquabot Plus Remote Control inground pool vacuum AUTHORIZED DEALER- 1 year limited manufacturer warranty Simply plug in its compact power supply to any grounded outlet and let the super efficient 24-Volt Aquabot Plus Remote Control clean your entire pool, from floor to waterline, or use its wireless remote to spot clean while the Aquabot Plus Remote Control reduces total maintenance costs (water, chemicals and energy) by as much as 50%! Works without hoses, pool?s filter, or booster pump.Climbs and cleans pool sidewalls and most steps and loveseats.Cleans any size, shape and type of pool.Filters out sand, silt, algae and bacteria. Vacuums up large leaves and twigs.Wireless 4-way directional remote.No installation or assembly required. Technical Specifications - Aquabot Plus Remote Control Quantity of Water Filtered 4500 Gallons per Hour Cleaning Coverage 6500 Sq. Ft / Hr. Electrical Cord Length 75ft (75 Feet of Industrial Strength Cord Encased In Thermoplastic Floating Rubber (1/2? Width Easy to Conceal - No Bulky Hoses or Installations) Unit Weight 19 lbs. Wattage 155 Watts Reset Switch Manual (To prevent accidental restart) Operating Cost 1 Kilowatt hr. per 7 hours Approximately 15cents per use Electrical Plug 110v/60Hz or 220v/50Hz Filtration - Micron Rating Self Contained ? Down To 2 Microns Scrubbing Ability Heavy Duty - All Types Shipping Dimensions 17.5" x 21.5" x 19.5" This item has to be shipped to a confirmed paypal address. We are an authorized dealer for Aqua Products, so you can rest assured that you will be receiving authentic, brand new products with a warranty that will be honored by the manufacturer. Made With Pride In The USA Manufacturer Warranty: 1 year SKU: aquaplusremote If you are outside the Continental United States, use the shipping calculator below. If your country does not calculate, we do not usually ship this item to your country. You can email us to request an exception.

The Aquabot is the original robotic cleaner, updated with capabilities to outperform everything else in its class! The Aquabot is recommended for pools up to 20' x 40' and cleans any shape or surface pool! Technical Specifications - Aquabot Quantity of Water Filtered 4000 Gallons per Hour Cleaning Coverage 3500 Sq. Ft / Hr. Electrical Cord Length 51ft. Unit Weight 16.9 lbs. Wattage 140 Watts Reset Switch N/A Operating Cost 1 Kilowatt hr. per 7 hours Approximately 15cents per use Electrical Plug 110v/60Hz or 230v/50Hz Filtration - Micron Rating Self Contained ? Down To 2 Microns Scrubbing Ability Heavy Duty - All Types Shipping Dimensions 17.5" x 17.5" x 19.5" Shipping Weight 36 lbs. This item has to be shipped to a confirmed paypal address. We are an authorized dealer for Aqua Products, so you can rest assured that you will be receiving authentic, brand new products with a warranty that will be honored by the manufacturer. This item will ship direct from the manufacturer. Manufacturer Warranty: 1 year SKU: aquainground If you are outside the Continental United States, use the shipping calculator below. If your country does not calculate, we do not usually ship this item to your country. You can email us to request an exception.

The Pool Pantry is designed to store all your pool accessories in one convenient storage "pantry". Includes durable cover and accessory pouch! Easy to assemble. Lightweight and sturdy. The Pool Pantry will hold approximately a combination of 4 floats/chairs/loungers depending on what you have. You could do 3 floats and 1 chair or 2 floats, 1 chair, and 1 lounger. In all, about 4 pieces hanging. The bottom is open for drainage and the pantry color is a light blue. There is room in the bottom for life vests, pool saddles, or kick boards. There are several pouches in the middle for flip-flops or pool toys. The approximate weight limit is about 200 lbs. Manufacturer Warranty: 1 year SKU: ppsr-188 If you are outside the Continental United States, use the shipping calculator below. If your country does not calculate, we do not usually ship this item to your country. You can email us to request an exception.